However, our assumption is that it is not just an antenna, but rather a complete GPS receiver. This can be equipped with a GPS antenna, which is available separately. The Dashcam does not have a built-in GPS module, but has a GPS input. Everything important can be seen on the video and in the area around 20 m you can even read the license plates (were pixelated). The quality is quite acceptable compared to the low price, even if the user can’t expect Canon, Nikon or GoPro quality. The following video shows a small compilation of 5 short videos in our OCinside YouTube Channel. If the card is full, the video pieces (3-10 min) will be deleted or transferred from the front. This results in a running time of just over 5 hours for a 32 GB memory card with continuous recording. A three-minute video file saved in the *.MOV format is approximately 300 MB in size. We can choose between files of 3 minutes, 5 minutes and 10 minutes in length. Now we mount the camera in a car and see how it performs. If you have an accident and are still able to press this key, the current recording will be locked for deletion and not overwritten by the system when the final capacity is reached. We almost forgot the leftmost key, which is marked with a yellow triangle with exclamation mark. Last but not least, we can also reset the camera by software and display the software version. If you insert a MicroSD card, you can format it using the options menu. It is also possible to have the recording carried out in fast motion. This can only be recorded with continuous recording. We do not consider this to be optimal, since in the event of an accident, the events a few seconds before the accident can also be important. The camera only records automatically when the vehicle’s movements change abruptly. The camera offers the possibility to adjust the sensitivity of the motion detection. You have the choice to activate the audio recording and/or set the speed unit in kilometres per hour or miles per hour. The user can choose between four resolutions. Select the desired resolution in the settings menu. The dashcam then displays the main screen and the video image. The USB connector at the bottom end of the dashcam would have been better, so that the cable could be led down cleanly.Īfter starting you can select the language … We connect the USB cable to the camera and it starts automatically.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |